I just purchased a license and when I attempt to activation it says the license is not valid. Attached is the info concerning my purchase. The system ID is 0ED4-1F4E-3B73-8365

Hello
Make sure that you update to Pass4sure Suite 3.1.1, which can be downloaded here:
http://www.Pass4sure.com/downloads/visual-certexam-suite.html
After installation, run the Manager component, click the Help menu, and then click "Register..." to begin the registration process. Enter your registration code exactly as I have pasted it below:
XQklBicXDyVOTCIIHSZ2bT88Xms8LTU68d9cUhQpRBcnOg0jHX0rezoTPAhJMAgeERsXEGcrY0Z9dXJyCgoLOAsCBQJ#fHx7
Please let us know if you have any further questions or comments.
Regards,
Ezra
Pass4sure Support
www.Pass4sure.com

Hi,
I recently purchased Pass4sure Suite (Manager Only) a Personal
License (see attached).
My Registration code is: MPN2MR-802SS-DLU6J-MST7J-4FESW
I've installed version 3.1 and gone to HelpRegister the product.
Followed the prompts and it was successful.
But when it restarts I get the popup "My license has been locked".
Can you check it and advise please?
Regards
Ken
Ken McQuilton
This e-mail has been scanned for viruses by the Cable&Wireless Worldwide e-mail security system. For more information on a proactive
managed e-mail secure service, visit http://www.cw.com/managed-exchange
The information contained in this e-mail is confidential and may also be subject to legal privilege. It is intended only for the recipient(s) named above.
If you are not named above as a recipient, you must not read, copy, disclose, forward or otherwise use the information contained in this email. If you
have received this e-mail in error, please notify the sender (whose contact details are above) immediately by reply e-mail and delete the message and any
attachments without retaining any copies.
Cable & Wireless Worldwide plc
Registered in England and Wales. Company Number 07029206
Registered office: Waterside House, Longshot Lane, Bracknell, Berkshire, RG12 1XL, England

Hello
Make sure that you update to Pass4sure Suite 3.1.1, which can be downloaded here:
http://www.Pass4sure.com/downloads/visual-certexam-suite.html
After installation, run the Manager component, click the Help menu, and then click "Register..." to begin the registration process. Enter your registration code exactly as I have pasted it below:
MPN2MR-802SS-DLU6J-MST7J-4FESW
Please let us know if you have any further questions or comments.
Regards,
Ezra
Pass4sure Support
www.Pass4sure.com

Dear Avanest ;
hi, I have updated my visual cert Exam to new version as you recommended and then after a while my license has been locked till now. I tried to register it again but gave an error indicating your license not found. please check if there is any problem and what should I do? Thanks in advance.
My Pass4sure reference number: 38438585
Best Regards.
Sasan Ganjali (registered to Ivan karim)

Hello
Make sure that you update to Pass4sure Suite 3.1.1, which can be downloaded here:
http://www.Pass4sure.com/downloads/visual-certexam-suite.html
After installation, run the Manager component, click the Help menu, and then click "Register..." to begin the registration process. Enter your registration code exactly as I have pasted it below:
KRY5ChUEagtOSB4KMTYhNDAhRwouPjEN5hpUWgERPg0SEhtQeT0KGRJtHS5JMAEbHBEfEGhlemtxc3NxCgwHeg8IBQJkZ3ta
Please let us know if you have any further questions or comments.
Regards,
Ezra
Pass4sure Support
www.Pass4sure.com

Hi,
I bought two copies of Pass4sure Suite but I noticed that the keys sent to me after the second purchase was the same with the previous one. My first purchase was on 30th October 2012 with reference number 37675678. And the second purchase was on 8th January 2013 with reference number 40513325.
Kindly issue new Registration Code for my new purchase.

Hello Olajide,
Although the registration code is the same, your account has been updated to allow 5 additional activations of our software. Make sure that you update to Pass4sure Suite 3.1.1, which can be downloaded here:
http://www.Pass4sure.com/downloads/visual-certexam-suite.html
After installation, run the Manager component, click the Help menu, and then click "Register..." to begin the registration process. Enter your registration code exactly as I have pasted it below:
ISIjJAQONTFJSSovNzYhMjRzSEMzOzEpjixSUxoUUi4YPxwQBQYdIxYLCgwABQczJhBYG2hhYE1wcXJwEgYGfwoIDAdweHF#
Please let us know if you have any further questions or comments.
Regards,
Ezra
Pass4sure Support
www.Pass4sure.com

Kindly let us know if we download after paying will it work for only only file and can be installed in only one system.

Hello
Each copy of the personal license for Pass4sure Suite allows for installation on up to 5 computers for personal use. You will also receive free updates for the life of the product. The software can open an unlimited number of .vce exam files.
Once you register Pass4sure Suite, our system will record that registration and it will count against the total registrations allowed by your license. We have implemented a new feature that allows for manually "unregistering". You can do this from Manager by clicking the Help menu, then "About Pass4sure Manager", and then clicking "Unregister". Furthermore, after 6-12 months, our system stops counting old registrations against your total, and they automatically become available to you again. You can also purchase additional copies of the license at any time to increase your number of allowed registrations.
Please let us know if you have any further questions or comments.
Regards,
Ezra
Pass4sure Support
www.Pass4sure.com